TNCSG Series Contact Mode AFM probes with Conductive Coating
High Resolution Silicon AFM Cantilevers TNCSG series are designed for electrical modes which operate with the probe in contact with the surface. The cantilever has a gold reflective coating on the top side to maximise the laser signal. Conductive coating on the tip side can be gold or platinum- iridium with a thickness of 20-30nm.
Key Features
- Material: Single Crystal Silicon, N-type, 0.01-0.025 Ohm-cm, Antimony doped
- Chip size: 3.4×1.6×0.3mm
- Reflective side coating: Au
- Tip coating: Pt/Ir or Au (see product variations in the table)
- Tip curvature radius: <35nm
Please download the probes datasheet for more information on probe characteristics
| Part No. | Tip coating | Force constant min/typical/max (Nm) | Resonant Frequency min/typical/max (kHz) | Probes in pack | Cantilever length +/-10um | Cantilever width +/-5um | Cantilever thickness +/-1um | |
|---|---|---|---|---|---|---|---|---|
| TNCSG01/Pt/50 | Pt/Ir | 0.003/0.03/0.13 | 4/9.8/17 | 50 | 350 | 30 | 1.0 | |
| TNCSG01/Pt/50 | ||||||||
| TNCSG10/Pt/15 | Pt/Ir | 0.01/0.11/0.5 | 8/22/39 | 15 | 225 | 47.5 | 1.0 | |
| TNCSG10/Pt/15 | ||||||||
| TNCSG10/Pt/50 | Pt/Ir | 0.01/0.11/0.5 | 8/22/39 | 50 | 225 | 47.5 | 1.0 | |
| TNCSG10/Pt/50 | ||||||||
| TNCSG30/Pt/50 | Pt/Ir | 0.13/0.6/2 | 26/48/76 | 50 | 190 | 30 | 1.5 | |
| TNCSG30/Pt/50 | ||||||||
| TNCSG01/Au/15 | Au | 0.003/0.03/0.13 | 4/9.8/17 | 15 | 450 | 47.5 | 1.25 | |
| TNCSG01/Au/15 | ||||||||
| TNCSG01/Au/50 | Au | 0.003/0.03/0.13 | 4/9.8/17 | 50 | 450 | 47.5 | 1.25 | |
| TNCSG01/Au/50 | ||||||||
| TNCSG10/Au/50 | Au | 0.01/0.11/0.5 | 8/22/39 | 50 | 225 | 30 | 1.0 | |
| TNCSG10/Au/50 |
